Preparing the configure
- Tran Dai Quan
- Tran Khanh Ngoc
Procedure
Step 1: Please fill in the formation in yellow cells.
VLAN & Port groups will be created on vDistributed Switch.
# | Port Group | VLAN | Remark |
1 | Management | 137 | For NSX Autonomous Edge management |
2 | Uplink | 138 | For NSX Autonomous Edge uplink |
3 | Trunk | 140, 141, 142 | Stretch L2 network traffic |
Network settings for NSX Autonomous Edge.
# | OVF Template Name | Port Group | Primary Node | Second Node (optional) | Remark |
1 | Network 0 | Management | 192.168.137.79 | 192.168.137.80 |
|
2 | Network 1 | Uplink | 192.168.138.77 | – | must to have access to internet |
3 | Network 2 | Trunk | – | – |
|
4 | Network 3 | – (HA, optional) | 192.168.137.81 | 192.168.137.82 |
|
Public IP address:
On-premises Public IP | HI GIO's Public IP |
|
|
Step 2: Creating port groups (VLANs)on vCenter (if we don't have)
Step 3: Configure VLAN & Security for TRUNK port
Tag VLAN:
Set security: enable Promiscuous mode and Forged transmits
Step 4: Creating Network on HI GIO (detail steps can check here)
These networks are stretch layer 2 (same subnet as on-prem).
Select IP for gateway CIDR (It's must not duplicate IP address)
End.